Skip to content
Edge LabSign in
K2

Carving · Tip rocker

K2 Blur 79 2027

K2 Blur 79 2027 top sheet, image © K2
image © K2
Category
Carving
Profile
Tip rocker
Lengths
156 · 163 · 170 · 177 cm
Tip / waist / tail
120 / 79 / 108 mm
Radius
16.3 m at 177 cm
Weight
1,755 g per ski at 177 cm
Core
Aspen Veneer
Metal
not stated
Carbon
not stated
Sidewall
not stated
Base
not stated
Intended ability
not stated

Lengths and published dimensions

  • 156 cm

    Tip (mm)
    120.0
    Waist (mm)
    79.0
    Tail (mm)
    108.0
    Radius (m)
    12.7est.
    Weight (g, per ski)
    not published
  • 163 cm

    Tip (mm)
    120.0
    Waist (mm)
    79.0
    Tail (mm)
    108.0
    Radius (m)
    13.8est.
    Weight (g, per ski)
    not published
  • 170 cm

    Tip (mm)
    120.0
    Waist (mm)
    79.0
    Tail (mm)
    108.0
    Radius (m)
    15.0est.
    Weight (g, per ski)
    not published
  • 177 cm

    Tip (mm)
    120.0
    Waist (mm)
    79.0
    Tail (mm)
    108.0
    Radius (m)
    16.3
    Weight (g, per ski)
    1,755
Dimensions by length
LengthTip (mm)Waist (mm)Tail (mm)Radius (m)Weight (g, per ski)
156 cm120.079.0108.012.7est.not published
163 cm120.079.0108.013.8est.not published
170 cm120.079.0108.015.0est.not published
177 cm120.079.0108.016.31,755
K2 Blur 79, top view, 177 cm: tip 120 mm, waist 79 mm, tail 108 mmTAIL 108 mmWAIST 79 mmTIP 120 mm

“est.” marks a number the maker does not publish: ours. Where each number was read is under “Where these numbers come from” at the bottom.

What the model says

Carve radius, to scale

  • Sidecut radius: 16.3 m
  • Carve radius at 30° edge: 14.1 m
  • Carve radius at 45° edge: 11.5 m
All three drawn on one scale, from the same starting point. A smaller arc is a tighter turn.

Edge hold and float

  • Edge hold: 100%, Holds well
  • Float: 21%, Sinks
Ticks mark where the word changes. For 90 kg at 177 cm: hold on groomed snow, float in powder. Model figures, not measurements.

The K2 Blur 79 at 177 cm, worked out by the Edge Lab model for three skier weights.

  • 70 kg skier

    Carve radius at 30° / 45° / 60°
    14.1 / 11.5 / 8.2 m
    Edge hold, groomed
    Holds well (100%)
    Edge hold, ice
    On the limit (69%)
    Float, powder
    Sinks (22%)
  • 90 kg skier

    Carve radius at 30° / 45° / 60°
    14.1 / 11.5 / 8.2 m
    Edge hold, groomed
    Holds well (100%)
    Edge hold, ice
    On the limit (66%)
    Float, powder
    Sinks (21%)
  • 110 kg skier

    Carve radius at 30° / 45° / 60°
    14.1 / 11.5 / 8.2 m
    Edge hold, groomed
    Holds well (100%)
    Edge hold, ice
    On the limit (63%)
    Float, powder
    Sinks (19%)
The K2 Blur 79 at 177 cm, worked out by the Edge Lab model for three skier weights.
SkierCarve radius at 30° / 45° / 60° edgeEdge hold, groomedEdge hold, iceFloat, powder
70 kg14.1 / 11.5 / 8.2 mHolds well (100%)On the limit (69%)Sinks (22%)
90 kg14.1 / 11.5 / 8.2 mHolds well (100%)On the limit (66%)Sinks (21%)
110 kg14.1 / 11.5 / 8.2 mHolds well (100%)On the limit (63%)Sinks (19%)

These are the model’s numbers, not measurements. Carve radius comes from the sidecut, so it does not change with weight; edge hold and float do. Flex and camber are our estimates (see “What the model uses” below).

By ability

The K2 Blur 79 at 177 cm for a 90 kg skier on groomed snow. Reviewers are mostly experts, so read the left of each band for what most skiers get.

Edge hold

On firm snow, 177 cm
  • First-timer: slides (19%)
  • Beginner: slides (41%)
  • Intermediate: on the limit (70%), assumed level
  • Advanced: holds well (95%)
  • Expert: holds well (100%)
assumed intermediate: on the limit (70%)

Float

In soft snow
  • First-timer: sinks (16%)
  • Beginner: sinks (17%)
  • Intermediate: sinks (18%), assumed level
  • Advanced: sinks (20%)
  • Expert: sinks (21%)
assumed intermediate: sinks (18%)

Ease

How forgiving it is
  • First-timer: hard (0%)
  • Beginner: hard (41%)
  • Intermediate: easy (89%), assumed level
  • Advanced: easy (100%)
  • Expert: easy (100%)
assumed intermediate: easy (89%)

Our model, run with working assumptions about how each level skis (edge angle, speed, how much weight reaches the edge). Not measurements. The marked cell assumes an intermediate skier; compare with your own details to see your own level.

Who it suits

It suits

  • 70 kg, intermediate, on groomers259 of 547 skis in the catalogue for this skier.
    • Carve radius about 14.1 m at 30° edge and 11.5 m at 45° (177 cm)
    • Strongest here: edge hold. Weakest: float.

It doesn’t suit

  • 90 kg, advanced, all over the mountain407 of 547 skis in the catalogue for this skier.
    • Carve radius about 14.1 m at 30° edge and 11.5 m at 45° (177 cm)
    • Strongest here: edge hold. Weakest: float.
  • 110 kg, expert, off-piste in soft snow409 of 547 skis in the catalogue for this skier.

    What the model uses

    Physics inputs
    Flex underfoot214 N·m²est.Edge Lab archetype default (interpolated by waist) (read 9 Oct 2026)
    Camber height6.0 mmest.Edge Lab archetype default (interpolated by waist) (read 9 Oct 2026)
    Tip rocker15.3 % of lengthest.Edge Lab archetype default (interpolated by waist) (read 9 Oct 2026)
    Tail rocker6.4 % of lengthest.Edge Lab archetype default (interpolated by waist) (read 9 Oct 2026)
    Tip rocker height7.3 mmest.Edge Lab archetype default (interpolated by waist) (read 9 Oct 2026)
    Tail rocker height1.2 mmest.Edge Lab archetype default (interpolated by waist) (read 9 Oct 2026)
    Mount point offset-7.4 cmest.Edge Lab archetype default (interpolated by waist) (read 9 Oct 2026)

    Made of

    Construction
    CoreAspen Veneer
    Maker's descriptionAspen Veneer, Biobased Resin

    Only what the maker prints. A field left out is one the maker does not state.

    What reviewers say

    No published reviews of this ski yet.

    Compare with…

    Where to buy

    No shops to show for this ski yet. When we list one, it appears here with the reason it was picked.

    Where these numbers come fromk2snow.com, edgelab.ski, read 9 Oct 2026· “est.” marks ours

    Numbers come from the maker’s own pages, with the date we read them. “est.” marks a number the maker does not publish: ours.