Skip to content
Edge LabSign in
Rossignol

Carving · Tip rocker

Rossignol Hero Elite LT Ti 2027

Category
Carving
Profile
Tip rocker
Lengths
167 · 172 · 177 · 182 cm
Tip / waist / tail
120 / 71 / 102 mm
Radius
17.0 m at 177 cm
Weight
not stated
Core
BEECH PEFC WOOD CORE
Metal
1 metal sheet
Carbon
not stated
Sidewall
not stated
Base
SINTERED HD BASE
Intended ability
not stated

Lengths and published dimensions

  • 167 cm

    Tip (mm)
    120.0
    Waist (mm)
    71.0
    Tail (mm)
    102.0
    Radius (m)
    15.0
    Weight (g, per ski)
    not published
  • 172 cm

    Tip (mm)
    120.0
    Waist (mm)
    71.0
    Tail (mm)
    102.0
    Radius (m)
    16.0
    Weight (g, per ski)
    not published
  • 177 cm

    Tip (mm)
    120.0
    Waist (mm)
    71.0
    Tail (mm)
    102.0
    Radius (m)
    17.0
    Weight (g, per ski)
    not published
  • 182 cm

    Tip (mm)
    120.0
    Waist (mm)
    71.0
    Tail (mm)
    102.0
    Radius (m)
    18.0
    Weight (g, per ski)
    not published
Dimensions by length
LengthTip (mm)Waist (mm)Tail (mm)Radius (m)Weight (g, per ski)
167 cm120.071.0102.015.0not published
172 cm120.071.0102.016.0not published
177 cm120.071.0102.017.0not published
182 cm120.071.0102.018.0not published
Rossignol Hero Elite LT Ti, top view, 177 cm: tip 120 mm, waist 71 mm, tail 102 mmTAIL 102 mmWAIST 71 mmTIP 120 mm

“est.” marks a number the maker does not publish: ours. Where each number was read is under “Where these numbers come from” at the bottom.

What the model says

Carve radius, to scale

  • Sidecut radius: 17 m
  • Carve radius at 30° edge: 14.7 m
  • Carve radius at 45° edge: 12 m
All three drawn on one scale, from the same starting point. A smaller arc is a tighter turn.

Edge hold and float

  • Edge hold: 100%, Holds well
  • Float: 11%, Sinks
Ticks mark where the word changes. For 90 kg at 177 cm: hold on groomed snow, float in powder. Model figures, not measurements.

The Rossignol Hero Elite LT Ti at 177 cm, worked out by the Edge Lab model for three skier weights.

  • 70 kg skier

    Carve radius at 30° / 45° / 60°
    14.7 / 12 / 8.5 m
    Edge hold, groomed
    Holds well (100%)
    Edge hold, ice
    On the limit (73%)
    Float, powder
    Sinks (11%)
  • 90 kg skier

    Carve radius at 30° / 45° / 60°
    14.7 / 12 / 8.5 m
    Edge hold, groomed
    Holds well (100%)
    Edge hold, ice
    On the limit (69%)
    Float, powder
    Sinks (11%)
  • 110 kg skier

    Carve radius at 30° / 45° / 60°
    14.7 / 12 / 8.5 m
    Edge hold, groomed
    Holds well (100%)
    Edge hold, ice
    On the limit (67%)
    Float, powder
    Sinks (11%)
The Rossignol Hero Elite LT Ti at 177 cm, worked out by the Edge Lab model for three skier weights.
SkierCarve radius at 30° / 45° / 60° edgeEdge hold, groomedEdge hold, iceFloat, powder
70 kg14.7 / 12 / 8.5 mHolds well (100%)On the limit (73%)Sinks (11%)
90 kg14.7 / 12 / 8.5 mHolds well (100%)On the limit (69%)Sinks (11%)
110 kg14.7 / 12 / 8.5 mHolds well (100%)On the limit (67%)Sinks (11%)

These are the model’s numbers, not measurements. Carve radius comes from the sidecut, so it does not change with weight; edge hold and float do. Flex and camber are our estimates (see “What the model uses” below).

By ability

The Rossignol Hero Elite LT Ti at 177 cm for a 90 kg skier on groomed snow. Reviewers are mostly experts, so read the left of each band for what most skiers get.

Edge hold

On firm snow, 177 cm
  • First-timer: slides (19%)
  • Beginner: slides (41%)
  • Intermediate: on the limit (70%), assumed level
  • Advanced: holds well (95%)
  • Expert: holds well (100%)
assumed intermediate: on the limit (70%)

Float

In soft snow
  • First-timer: sinks (8%)
  • Beginner: sinks (9%)
  • Intermediate: sinks (9%), assumed level
  • Advanced: sinks (10%)
  • Expert: sinks (11%)
assumed intermediate: sinks (9%)

Ease

How forgiving it is
  • First-timer: hard (0%)
  • Beginner: hard (20%)
  • Intermediate: manageable (74%), assumed level
  • Advanced: easy (100%)
  • Expert: easy (100%)
assumed intermediate: manageable (74%)

Our model, run with working assumptions about how each level skis (edge angle, speed, how much weight reaches the edge). Not measurements. The marked cell assumes an intermediate skier; compare with your own details to see your own level.

Who it suits

It suits

None of the three skiers we check puts it in the top half of the catalogue.

It doesn’t suit

  • 70 kg, intermediate, on groomers505 of 739 skis in the catalogue for this skier.
    • Carve radius about 14.7 m at 30° edge and 12 m at 45° (177 cm)
    • Strongest here: edge hold. Weakest: float.
  • 90 kg, advanced, all over the mountain601 of 739 skis in the catalogue for this skier.
    • 110 kg, expert, off-piste in soft snow617 of 739 skis in the catalogue for this skier.

      What the model uses

      Physics inputs
      Flex underfoot239 N·m²est.Edge Lab archetype default (interpolated by waist) (read 9 Oct 2026)
      Camber height7.0 mmest.Edge Lab archetype default (interpolated by waist) (read 9 Oct 2026)
      Tip rocker12.0 % of lengthest.Edge Lab archetype default (interpolated by waist) (read 9 Oct 2026)
      Tail rocker6.0 % of lengthest.Edge Lab archetype default (interpolated by waist) (read 9 Oct 2026)
      Tip rocker height4.0 mmest.Edge Lab archetype default (interpolated by waist) (read 9 Oct 2026)
      Tail rocker height0.0 mmest.Edge Lab archetype default (interpolated by waist) (read 9 Oct 2026)
      Mount point offset-7.0 cmest.Edge Lab archetype default (interpolated by waist) (read 9 Oct 2026)

      Made of

      Construction
      CoreBEECH PEFC WOOD CORE
      Metal1 metal layer
      BaseSINTERED HD BASE

      Only what the maker prints. A field left out is one the maker does not state.

      What reviewers say

      No published reviews of this ski yet.

      Compare with…

      Where to buy

      No shops to show for this ski yet. When we list one, it appears here with the reason it was picked.

      Where these numbers come fromrossignol.com, edgelab.ski, read 11 Oct 2026· “est.” marks ours

      Numbers come from the maker’s own pages, with the date we read them. “est.” marks a number the maker does not publish: ours.