Skip to content
Edge LabSign in
K2

Freeride · Tip rocker

K2 Mindbender 101 W 2027

K2 Mindbender 101 W 2027 top sheet, image © K2
image © K2
Category
Freeride
Profile
Tip rocker
Lengths
157 · 164 · 171 cm
Tip / waist / tail
130 / 101 / 122 mm
Radius
17.0 m at 171 cm
Weight
1,735 g per ski at 171 cm
Core
Aspen Paulownia
Metal
not stated
Carbon
not stated
Sidewall
not stated
Base
not stated
Intended ability
not stated

Lengths and published dimensions

  • 157 cm

    Tip (mm)
    130.0
    Waist (mm)
    101.0
    Tail (mm)
    122.0
    Radius (m)
    14.3est.
    Weight (g, per ski)
    not published
  • 164 cm

    Tip (mm)
    130.0
    Waist (mm)
    101.0
    Tail (mm)
    122.0
    Radius (m)
    15.6est.
    Weight (g, per ski)
    not published
  • 171 cm

    Tip (mm)
    130.0
    Waist (mm)
    101.0
    Tail (mm)
    122.0
    Radius (m)
    17.0
    Weight (g, per ski)
    1,735
Dimensions by length
LengthTip (mm)Waist (mm)Tail (mm)Radius (m)Weight (g, per ski)
157 cm130.0101.0122.014.3est.not published
164 cm130.0101.0122.015.6est.not published
171 cm130.0101.0122.017.01,735
K2 Mindbender 101 W, top view, 171 cm: tip 130 mm, waist 101 mm, tail 122 mmTAIL 122 mmWAIST 101 mmTIP 130 mm

“est.” marks a number the maker does not publish: ours. Where each number was read is under “Where these numbers come from” at the bottom.

What the model says

Carve radius, to scale

  • Sidecut radius: 17 m
  • Carve radius at 30° edge: 14.7 m
  • Carve radius at 45° edge: 12 m
All three drawn on one scale, from the same starting point. A smaller arc is a tighter turn.

Edge hold and float

  • Edge hold: 99%, Holds well
  • Float: 73%, Floats well
Ticks mark where the word changes. For 90 kg at 171 cm: hold on groomed snow, float in powder. Model figures, not measurements.

The K2 Mindbender 101 W at 171 cm, worked out by the Edge Lab model for three skier weights.

  • 70 kg skier

    Carve radius at 30° / 45° / 60°
    14.7 / 12 / 8.5 m
    Edge hold, groomed
    Holds well (100%)
    Edge hold, ice
    On the limit (65%)
    Float, powder
    Floats well (85%)
  • 90 kg skier

    Carve radius at 30° / 45° / 60°
    14.7 / 12 / 8.5 m
    Edge hold, groomed
    Holds well (99%)
    Edge hold, ice
    On the limit (61%)
    Float, powder
    Floats well (73%)
  • 110 kg skier

    Carve radius at 30° / 45° / 60°
    14.7 / 12 / 8.5 m
    Edge hold, groomed
    Holds well (97%)
    Edge hold, ice
    Slides (57%)
    Float, powder
    Some float (66%)
The K2 Mindbender 101 W at 171 cm, worked out by the Edge Lab model for three skier weights.
SkierCarve radius at 30° / 45° / 60° edgeEdge hold, groomedEdge hold, iceFloat, powder
70 kg14.7 / 12 / 8.5 mHolds well (100%)On the limit (65%)Floats well (85%)
90 kg14.7 / 12 / 8.5 mHolds well (99%)On the limit (61%)Floats well (73%)
110 kg14.7 / 12 / 8.5 mHolds well (97%)Slides (57%)Some float (66%)

These are the model’s numbers, not measurements. Carve radius comes from the sidecut, so it does not change with weight; edge hold and float do. Flex and camber are our estimates (see “What the model uses” below).

By ability

The K2 Mindbender 101 W at 171 cm for a 90 kg skier on groomed snow. Reviewers are mostly experts, so read the left of each band for what most skiers get.

Edge hold

On firm snow, 171 cm
  • First-timer: slides (19%)
  • Beginner: slides (40%)
  • Intermediate: on the limit (69%), assumed level
  • Advanced: holds well (94%)
  • Expert: holds well (99%)
assumed intermediate: on the limit (69%)

Float

In soft snow
  • First-timer: some float (56%)
  • Beginner: some float (60%)
  • Intermediate: some float (63%), assumed level
  • Advanced: some float (68%)
  • Expert: floats well (73%)
assumed intermediate: some float (63%)

Ease

How forgiving it is
  • First-timer: hard (5%)
  • Beginner: manageable (73%)
  • Intermediate: easy (100%), assumed level
  • Advanced: easy (99%)
  • Expert: easy (86%)
assumed intermediate: easy (100%)

Our model, run with working assumptions about how each level skis (edge angle, speed, how much weight reaches the edge). Not measurements. The marked cell assumes an intermediate skier; compare with your own details to see your own level.

Who it suits

It suits

  • 70 kg, intermediate, on groomers87 of 547 skis in the catalogue for this skier.
    • Carve radius about 14.7 m at 30° edge and 12 m at 45° (171 cm)
    • Strongest here: edge hold. Even its weakest part, float, is solid.
  • 90 kg, advanced, all over the mountain122 of 547 skis in the catalogue for this skier.
    • 110 kg, expert, off-piste in soft snow128 of 547 skis in the catalogue for this skier.

      It doesn’t suit

      It lands in the top half of the catalogue for all three skiers we check.

      What the model uses

      Physics inputs
      Flex underfoot158 N·m²est.Edge Lab archetype default (interpolated by waist) (read 9 Oct 2026)
      Camber height3.3 mmest.Edge Lab archetype default (interpolated by waist) (read 9 Oct 2026)
      Tip rocker24.8 % of lengthest.Edge Lab archetype default (interpolated by waist) (read 9 Oct 2026)
      Tail rocker13.4 % of lengthest.Edge Lab archetype default (interpolated by waist) (read 9 Oct 2026)
      Tip rocker height18.4 mmest.Edge Lab archetype default (interpolated by waist) (read 9 Oct 2026)
      Tail rocker height8.6 mmest.Edge Lab archetype default (interpolated by waist) (read 9 Oct 2026)
      Mount point offset-6.4 cmest.Edge Lab archetype default (interpolated by waist) (read 9 Oct 2026)

      Made of

      Construction
      CoreAspen Paulownia
      Maker's descriptionTitanal I-Beam, Aspen Paulownia

      Only what the maker prints. A field left out is one the maker does not state.

      What reviewers say

      No published reviews of this ski yet.

      Compare with…

      Where to buy

      No shops to show for this ski yet. When we list one, it appears here with the reason it was picked.

      Where these numbers come fromk2snow.com, edgelab.ski, read 9 Oct 2026· “est.” marks ours

      Numbers come from the maker’s own pages, with the date we read them. “est.” marks a number the maker does not publish: ours.