Carving · Full camber
Dynastar Speed Course WC GS 170-182 R22
- Category
- Carving
- Profile
- Full camber
- Lengths
- 170 · 175 · 182 cm
- Tip / waist / tail
- 102 / 65 / 85 mm
- Radius
- 23.0 m at 175 cm
- Weight
- not stated
- Core
- BEECH PEFC WOOD CORE
- Metal
- 2 metal sheets
- Carbon
- not stated
- Sidewall
- Sandwich
- Base
- SINTERED FACTORY BASE
- Intended ability
- not stated
Lengths and published dimensions
170 cm
- Tip (mm)
- 104.0
- Waist (mm)
- 65.0
- Tail (mm)
- 87.0
- Radius (m)
- 20.0
- Weight (g, per ski)
- not published
175 cm
- Tip (mm)
- 102.0
- Waist (mm)
- 65.0
- Tail (mm)
- 85.0
- Radius (m)
- 23.0
- Weight (g, per ski)
- not published
182 cm
- Tip (mm)
- 103.0
- Waist (mm)
- 65.0
- Tail (mm)
- 85.0
- Radius (m)
- 25.0
- Weight (g, per ski)
- not published
| Length | Tip (mm) | Waist (mm) | Tail (mm) | Radius (m) | Weight (g, per ski) |
|---|---|---|---|---|---|
| 170 cm | 104.0 | 65.0 | 87.0 | 20.0 | not published |
| 175 cm | 102.0 | 65.0 | 85.0 | 23.0 | not published |
| 182 cm | 103.0 | 65.0 | 85.0 | 25.0 | not published |
“est.” marks a number the maker does not publish: ours. Where each number was read is under “Where these numbers come from” at the bottom.
What the model says
Carve radius, to scale
- Sidecut radius: 23 m
- Carve radius at 30° edge: 19.9 m
- Carve radius at 45° edge: 16.3 m
Edge hold and float
- Edge hold: 100%, Holds well
- Float: 11%, Sinks
The Dynastar Speed Course WC GS 170-182 R22 at 175 cm, worked out by the Edge Lab model for three skier weights.
70 kg skier
- Carve radius at 30° / 45° / 60°
- 19.9 / 16.3 / 11.5 m
- Edge hold, groomed
- Holds well (100%)
- Edge hold, ice
- On the limit (74%)
- Float, powder
- Sinks (11%)
90 kg skier
- Carve radius at 30° / 45° / 60°
- 19.9 / 16.3 / 11.5 m
- Edge hold, groomed
- Holds well (100%)
- Edge hold, ice
- On the limit (71%)
- Float, powder
- Sinks (11%)
110 kg skier
- Carve radius at 30° / 45° / 60°
- 19.9 / 16.3 / 11.5 m
- Edge hold, groomed
- Holds well (100%)
- Edge hold, ice
- On the limit (69%)
- Float, powder
- Sinks (11%)
| Skier | Carve radius at 30° / 45° / 60° edge | Edge hold, groomed | Edge hold, ice | Float, powder |
|---|---|---|---|---|
| 70 kg | 19.9 / 16.3 / 11.5 m | Holds well (100%) | On the limit (74%) | Sinks (11%) |
| 90 kg | 19.9 / 16.3 / 11.5 m | Holds well (100%) | On the limit (71%) | Sinks (11%) |
| 110 kg | 19.9 / 16.3 / 11.5 m | Holds well (100%) | On the limit (69%) | Sinks (11%) |
These are the model’s numbers, not measurements. Carve radius comes from the sidecut, so it does not change with weight; edge hold and float do. Flex and camber are our estimates (see “What the model uses” below).
By ability
The Dynastar Speed Course WC GS 170-182 R22 at 175 cm for a 90 kg skier on groomed snow. Reviewers are mostly experts, so read the left of each band for what most skiers get.
Edge hold
On firm snow, 175 cm- First-timer: slides (19%)
- Beginner: slides (41%)
- Intermediate: on the limit (70%), assumed level
- Advanced: holds well (95%)
- Expert: holds well (100%)
Float
In soft snow- First-timer: sinks (8%)
- Beginner: sinks (9%)
- Intermediate: sinks (9%), assumed level
- Advanced: sinks (10%)
- Expert: sinks (11%)
Ease
How forgiving it is- First-timer: hard (0%)
- Beginner: hard (4%)
- Intermediate: manageable (62%), assumed level
- Advanced: easy (100%)
- Expert: easy (100%)
Our model, run with working assumptions about how each level skis (edge angle, speed, how much weight reaches the edge). Not measurements. The marked cell assumes an intermediate skier; compare with your own details to see your own level.
Who it suits
It suits
None of the three skiers we check puts it in the top half of the catalogue.
It doesn’t suit
- 70 kg, intermediate, on groomers607 of 623 skis in the catalogue for this skier.
- Carve radius about 19.9 m at 30° edge and 16.3 m at 45° (175 cm)
- Strongest here: edge hold. Weakest: float.
- 90 kg, advanced, all over the mountain553 of 623 skis in the catalogue for this skier.
- 110 kg, expert, off-piste in soft snow452 of 623 skis in the catalogue for this skier.
What the model uses
| Flex underfoot | 249 N·m²est. | Edge Lab archetype default (interpolated by waist) (read 9 Oct 2026) |
|---|---|---|
| Camber height | 7.0 mmest. | Edge Lab archetype default (interpolated by waist) (read 9 Oct 2026) |
| Tip rocker | 12.0 % of lengthest. | Edge Lab archetype default (interpolated by waist) (read 9 Oct 2026) |
| Tail rocker | 6.0 % of lengthest. | Edge Lab archetype default (interpolated by waist) (read 9 Oct 2026) |
| Tip rocker height | 4.0 mmest. | Edge Lab archetype default (interpolated by waist) (read 9 Oct 2026) |
| Tail rocker height | 0.0 mmest. | Edge Lab archetype default (interpolated by waist) (read 9 Oct 2026) |
| Mount point offset | -7.0 cmest. | Edge Lab archetype default (interpolated by waist) (read 9 Oct 2026) |
Made of
| Core | BEECH PEFC WOOD CORE |
|---|---|
| Metal | 2 metal layers |
| Sidewall | Sandwich |
| Base | SINTERED FACTORY BASE |
| Maker's description | Packed with World Cup giant slalom race-inspired performance, the Dynastar Speed Course World Cup GS skis balance race-bred power with sidecut that offers easier steering and turn transitions. Race technology includes a beech wood core, and full-length titanal and rectangular sidewalls for powerful carving. |
Only what the maker prints. A field left out is one the maker does not state.
What reviewers say
No published reviews of this ski yet.
Compare with…
- Dynastar Speed Course WC GS 170-182 R22 vs Atomic Redster G9 FIS J-RP³ (side by side for your setup)
- Dynastar Speed Course WC GS 170-182 R22 vs Atomic Redster G9 FIS Revoshock (side by side for your setup)
- Dynastar Speed Course WC GS 170-182 R22 vs Atomic Redster G9 FIS Revoshock 187 (side by side for your setup)
Where to buy
No shops to show for this ski yet. When we list one, it appears here with the reason it was picked.
Where these numbers come fromdynastar-lange.com, edgelab.ski, read 11 Oct 2026· “est.” marks ours
- Unisex Racing Skis Speed Course Wc Gs 170-182 R22 | Blue | Dynastar-Lange (read 11 Oct 2026)
- Edge Lab archetype default (interpolated by waist) (read 9 Oct 2026)
Numbers come from the maker’s own pages, with the date we read them. “est.” marks a number the maker does not publish: ours.