Skip to content
Edge LabSign in
Zag

All-mountain · Rocker, camber, rocker

Zag AROC 2026

Zag AROC 2026 top sheet, image © Zag
image © Zag
Category
All-mountain
Profile
Rocker, camber, rocker
Lengths
153 · 160 · 166 · 173 · 178 · 185 cm
Tip / waist / tail
127 / 87 / 111 mm
Radius
17.8 m at 173 cm
Weight
not stated
Core
peuplier
Metal
not stated
Carbon
not stated
Sidewall
Sandwich
Base
not stated
Intended ability
not stated

Lengths and published dimensions

  • 153 cm

    Tip (mm)
    124.0
    Waist (mm)
    85.5
    Tail (mm)
    108.0
    Radius (m)
    14.8
    Weight (g, per ski)
    not published
  • 160 cm

    Tip (mm)
    125.0
    Waist (mm)
    85.5
    Tail (mm)
    109.0
    Radius (m)
    15.5
    Weight (g, per ski)
    not published
  • 166 cm

    Tip (mm)
    126.0
    Waist (mm)
    86.0
    Tail (mm)
    110.0
    Radius (m)
    16.6
    Weight (g, per ski)
    not published
  • 173 cm

    Tip (mm)
    127.2
    Waist (mm)
    86.5
    Tail (mm)
    111.2
    Radius (m)
    17.8
    Weight (g, per ski)
    not published
  • 178 cm

    Tip (mm)
    128.0
    Waist (mm)
    87.0
    Tail (mm)
    112.0
    Radius (m)
    18.6
    Weight (g, per ski)
    not published
  • 185 cm

    Tip (mm)
    128.5
    Waist (mm)
    87.0
    Tail (mm)
    112.5
    Radius (m)
    19.9
    Weight (g, per ski)
    not published
Dimensions by length
LengthTip (mm)Waist (mm)Tail (mm)Radius (m)Weight (g, per ski)
153 cm124.085.5108.014.8not published
160 cm125.085.5109.015.5not published
166 cm126.086.0110.016.6not published
173 cm127.286.5111.217.8not published
178 cm128.087.0112.018.6not published
185 cm128.587.0112.519.9not published
Zag AROC, top view, 173 cm: tip 127 mm, waist 87 mm, tail 111 mmTAIL 111 mmWAIST 87 mmTIP 127 mm

TAIL 111 mmWAIST 87 mmTIP 127 mm

“est.” marks a number the maker does not publish: ours. Where each number was read is under “Where these numbers come from” at the bottom.

What the model says

Carve radius, to scale

  • Sidecut radius: 17.8 m
  • Carve radius at 30° edge: 15.4 m
  • Carve radius at 45° edge: 12.6 m
All three drawn on one scale, from the same starting point. A smaller arc is a tighter turn.

Edge hold and float

  • Edge hold: 100%, Holds well
  • Float: 37%, Sinks
Ticks mark where the word changes. For 90 kg at 173 cm: hold on groomed snow, float in powder. Model figures, not measurements.

The Zag AROC at 173 cm, worked out by the Edge Lab model for three skier weights.

  • 70 kg skier

    Carve radius at 30° / 45° / 60°
    15.4 / 12.6 / 8.9 m
    Edge hold, groomed
    Holds well (100%)
    Edge hold, ice
    On the limit (67%)
    Float, powder
    Sinks (43%)
  • 90 kg skier

    Carve radius at 30° / 45° / 60°
    15.4 / 12.6 / 8.9 m
    Edge hold, groomed
    Holds well (100%)
    Edge hold, ice
    On the limit (64%)
    Float, powder
    Sinks (37%)
  • 110 kg skier

    Carve radius at 30° / 45° / 60°
    15.4 / 12.6 / 8.9 m
    Edge hold, groomed
    Holds well (100%)
    Edge hold, ice
    On the limit (61%)
    Float, powder
    Sinks (34%)
The Zag AROC at 173 cm, worked out by the Edge Lab model for three skier weights.
SkierCarve radius at 30° / 45° / 60° edgeEdge hold, groomedEdge hold, iceFloat, powder
70 kg15.4 / 12.6 / 8.9 mHolds well (100%)On the limit (67%)Sinks (43%)
90 kg15.4 / 12.6 / 8.9 mHolds well (100%)On the limit (64%)Sinks (37%)
110 kg15.4 / 12.6 / 8.9 mHolds well (100%)On the limit (61%)Sinks (34%)

These are the model’s numbers, not measurements. Carve radius comes from the sidecut, so it does not change with weight; edge hold and float do. Flex and camber are our estimates (see “What the model uses” below).

By ability

The Zag AROC at 173 cm for a 90 kg skier on groomed snow. Reviewers are mostly experts, so read the left of each band for what most skiers get.

Edge hold

On firm snow, 173 cm
  • First-timer: slides (19%)
  • Beginner: slides (41%)
  • Intermediate: on the limit (70%), assumed level
  • Advanced: holds well (95%)
  • Expert: holds well (100%)
assumed intermediate: on the limit (70%)

Float

In soft snow
  • First-timer: sinks (28%)
  • Beginner: sinks (30%)
  • Intermediate: sinks (32%), assumed level
  • Advanced: sinks (34%)
  • Expert: sinks (37%)
assumed intermediate: sinks (32%)

Ease

How forgiving it is
  • First-timer: hard (0%)
  • Beginner: hard (43%)
  • Intermediate: easy (91%), assumed level
  • Advanced: easy (100%)
  • Expert: easy (100%)
assumed intermediate: easy (91%)

Our model, run with working assumptions about how each level skis (edge angle, speed, how much weight reaches the edge). Not measurements. The marked cell assumes an intermediate skier; compare with your own details to see your own level.

Who it suits

It suits

None of the three skiers we check puts it in the top half of the catalogue.

It doesn’t suit

  • 70 kg, intermediate, on groomers462 of 739 skis in the catalogue for this skier.
    • Carve radius about 15.4 m at 30° edge and 12.6 m at 45° (173 cm)
    • Strongest here: edge hold. Weakest: float.
  • 90 kg, advanced, all over the mountain429 of 739 skis in the catalogue for this skier.
    • 110 kg, expert, off-piste in soft snow455 of 739 skis in the catalogue for this skier.

      What the model uses

      Physics inputs
      Flex underfoot197 N·m²est.Edge Lab archetype default (interpolated by waist) (read 9 Oct 2026)
      Camber height4.9 mmest.Edge Lab archetype default (interpolated by waist) (read 9 Oct 2026)
      Tip rocker18.6 % of lengthest.Edge Lab archetype default (interpolated by waist) (read 9 Oct 2026)
      Tail rocker6.8 % of lengthest.Edge Lab archetype default (interpolated by waist) (read 9 Oct 2026)
      Tip rocker height10.6 mmest.Edge Lab archetype default (interpolated by waist) (read 9 Oct 2026)
      Tail rocker height2.5 mmest.Edge Lab archetype default (interpolated by waist) (read 9 Oct 2026)
      Mount point offset-7.8 cmest.Edge Lab archetype default (interpolated by waist) (read 9 Oct 2026)

      Made of

      Construction
      Corepeuplier
      SidewallSandwich
      Maker's descriptionLe noyau en peuplier offre au AROC un ski réactif et durable. Des inserts alu au tail et au nose renforcent la structure aux points clés, pour plus de résistance et une touche de style assumée. La fibre de verre multiaxiale apporte accroche et dynamisme, tandis que l'insert anti-vibratoire en caoutchouc absorbe les aspérités du terrain pour un ski confortable en toutes conditions. Une construction puissante et sans défaut.

      Only what the maker prints. A field left out is one the maker does not state.

      What reviewers say

      No published reviews of this ski yet.

      Compare with…

      Where to buy

      No shops to show for this ski yet. When we list one, it appears here with the reason it was picked.

      Where these numbers come fromzagskis.com, edgelab.ski, read 11 Oct 2026· “est.” marks ours

      Numbers come from the maker’s own pages, with the date we read them. “est.” marks a number the maker does not publish: ours.