Skip to content
Edge LabSign in
ON3P

Powder · Rocker, camber, rocker

ON3P Jeffrey 118 2027

ON3P Jeffrey 118 2027 top sheet, image © ON3P
image © ON3P
Category
Powder
Profile
Rocker, camber, rocker
Lengths
181 · 186 · 191 cm
Tip / waist / tail
145 / 118 / 137 mm
Radius
22.8 m at 181 cm
Weight
2,195 g per ski at 181 cm
Core
100% bamboo core
Metal
not stated
Carbon
Stringers
Sidewall
not stated
Base
1.8mm Durasurf base
Intended ability
not stated

Lengths and published dimensions

  • 181 cm

    Tip (mm)
    145.0
    Waist (mm)
    118.0
    Tail (mm)
    137.0
    Radius (m)
    22.8
    Weight (g, per ski)
    2,195
  • 186 cm

    Tip (mm)
    146.0
    Waist (mm)
    118.0
    Tail (mm)
    138.0
    Radius (m)
    23.5
    Weight (g, per ski)
    2,305
  • 191 cm

    Tip (mm)
    147.0
    Waist (mm)
    118.0
    Tail (mm)
    139.0
    Radius (m)
    24.2
    Weight (g, per ski)
    2,425
Dimensions by length
LengthTip (mm)Waist (mm)Tail (mm)Radius (m)Weight (g, per ski)
181 cm145.0118.0137.022.82,195
186 cm146.0118.0138.023.52,305
191 cm147.0118.0139.024.22,425
ON3P Jeffrey 118, top view, 181 cm: tip 145 mm, waist 118 mm, tail 137 mmTAIL 137 mmWAIST 118 mmTIP 145 mm

“est.” marks a number the maker does not publish: ours. Where each number was read is under “Where these numbers come from” at the bottom.

What the model says

Carve radius, to scale

  • Sidecut radius: 22.8 m
  • Carve radius at 30° edge: 19.7 m
  • Carve radius at 45° edge: 16.1 m
All three drawn on one scale, from the same starting point. A smaller arc is a tighter turn.

Edge hold and float

  • Edge hold: 71%, On the limit
  • Float: 100%, Floats well
Ticks mark where the word changes. For 90 kg at 181 cm: hold on groomed snow, float in powder. Model figures, not measurements.

The ON3P Jeffrey 118 at 181 cm, worked out by the Edge Lab model for three skier weights.

  • 70 kg skier

    Carve radius at 30° / 45° / 60°
    19.7 / 16.1 / 11.4 m
    Edge hold, groomed
    On the limit (73%)
    Edge hold, ice
    Slides (40%)
    Float, powder
    Floats well (100%)
  • 90 kg skier

    Carve radius at 30° / 45° / 60°
    19.7 / 16.1 / 11.4 m
    Edge hold, groomed
    On the limit (71%)
    Edge hold, ice
    Slides (38%)
    Float, powder
    Floats well (100%)
  • 110 kg skier

    Carve radius at 30° / 45° / 60°
    19.7 / 16.1 / 11.4 m
    Edge hold, groomed
    On the limit (69%)
    Edge hold, ice
    Slides (37%)
    Float, powder
    Floats well (100%)
The ON3P Jeffrey 118 at 181 cm, worked out by the Edge Lab model for three skier weights.
SkierCarve radius at 30° / 45° / 60° edgeEdge hold, groomedEdge hold, iceFloat, powder
70 kg19.7 / 16.1 / 11.4 mOn the limit (73%)Slides (40%)Floats well (100%)
90 kg19.7 / 16.1 / 11.4 mOn the limit (71%)Slides (38%)Floats well (100%)
110 kg19.7 / 16.1 / 11.4 mOn the limit (69%)Slides (37%)Floats well (100%)

These are the model’s numbers, not measurements. Carve radius comes from the sidecut, so it does not change with weight; edge hold and float do. Flex and camber are our estimates (see “What the model uses” below).

By ability

The ON3P Jeffrey 118 at 181 cm for a 90 kg skier on groomed snow. Reviewers are mostly experts, so read the left of each band for what most skiers get.

Edge hold

On firm snow, 181 cm
  • First-timer: slides (13%)
  • Beginner: slides (29%)
  • Intermediate: slides (50%), assumed level
  • Advanced: on the limit (67%)
  • Expert: on the limit (71%)
assumed intermediate: slides (50%)

Float

In soft snow
  • First-timer: floats well (77%)
  • Beginner: floats well (82%)
  • Intermediate: floats well (86%), assumed level
  • Advanced: floats well (93%)
  • Expert: floats well (100%)
assumed intermediate: floats well (86%)

Ease

How forgiving it is
  • First-timer: easy (88%)
  • Beginner: easy (100%)
  • Intermediate: easy (86%), assumed level
  • Advanced: manageable (68%)
  • Expert: manageable (61%)
assumed intermediate: easy (86%)

Our model, run with working assumptions about how each level skis (edge angle, speed, how much weight reaches the edge). Not measurements. The marked cell assumes an intermediate skier; compare with your own details to see your own level.

Who it suits

It suits

  • 90 kg, advanced, all over the mountain152 of 739 skis in the catalogue for this skier.
    • Carve radius about 19.7 m at 30° edge and 16.1 m at 45° (181 cm)
    • Strongest here: float. Even its weakest part, edge hold, is solid.
  • 110 kg, expert, off-piste in soft snow29 of 739 skis in the catalogue for this skier.

    It doesn’t suit

    • 70 kg, intermediate, on groomers716 of 739 skis in the catalogue for this skier.
      • Carve radius about 19.7 m at 30° edge and 16.1 m at 45° (181 cm)
      • Strongest here: float. Weakest: turn shape.

    What the model uses

    Physics inputs
    Flex underfoot115 N·m²est.Edge Lab archetype default (interpolated by waist) (read 9 Oct 2026)
    Camber height0.0 mmest.Edge Lab archetype default (interpolated by waist) (read 9 Oct 2026)
    Tip rocker38.0 % of lengthest.Edge Lab archetype default (interpolated by waist) (read 9 Oct 2026)
    Tail rocker30.0 % of lengthest.Edge Lab archetype default (interpolated by waist) (read 9 Oct 2026)
    Tip rocker height32.0 mmest.Edge Lab archetype default (interpolated by waist) (read 9 Oct 2026)
    Tail rocker height18.0 mmest.Edge Lab archetype default (interpolated by waist) (read 9 Oct 2026)
    Mount point offset-4.0 cmest.Edge Lab archetype default (interpolated by waist) (read 9 Oct 2026)

    Made of

    Construction
    Core100% bamboo core
    CarbonCarbon stringers
    FibreglassTriaxial
    Base1.8mm Durasurf base
    Maker's descriptionEvery Jeffrey 118 is built with our custom 2800 hybrid fiberglass/carbon composite, a 100% bamboo core, full-length UHMW sidewalls, and the thickest bases and edges in skiing. The result is a stable, playful, and durable powder twin designed to take a beating.

    Only what the maker prints. A field left out is one the maker does not state.

    What reviewers say

    No published reviews of this ski yet.

    Compare with…

    Where to buy

    No shops to show for this ski yet. When we list one, it appears here with the reason it was picked.

    Where these numbers come fromon3pskis.com, edgelab.ski, read 11 Oct 2026· “est.” marks ours

    Numbers come from the maker’s own pages, with the date we read them. “est.” marks a number the maker does not publish: ours.