Skip to content
Edge Lab
Sign in
Nordica

All-mountain · Full camber

Nordica Multipista DC 80 TI Fdt

Nordica Multipista DC 80 TI Fdt top sheet, image © Nordica
image © Nordica
Category
All-mountain
Profile
Full camber
Lengths
160 · 165 · 170 · 175 · 180 · 185 cm
Tip / waist / tail
127est. / 80est. / 105est. mm
Radius
16.0 m at 175 cm
Weight
not stated
Core
Performance Wood
Metal
1 metal sheet
Carbon
not stated
Sidewall
not stated
Base
not stated
Intended ability
not stated
Compare for my setupGet more help

Lengths and published dimensions

  • 160 cm

    Tip (mm)
    123.0
    Waist (mm)
    80.0
    Tail (mm)
    101.0
    Radius (m)
    14.0
    Weight (g, per ski)
    not published

  • 165 cm

    Tip (mm)
    123.0est.
    Waist (mm)
    80.0est.
    Tail (mm)
    101.0est.
    Radius (m)
    14.5
    Weight (g, per ski)
    not published

  • 170 cm

    Tip (mm)
    123.0est.
    Waist (mm)
    80.0est.
    Tail (mm)
    101.0est.
    Radius (m)
    15.0
    Weight (g, per ski)
    not published

  • 175 cm

    Tip (mm)
    127.0est.
    Waist (mm)
    80.0est.
    Tail (mm)
    105.0est.
    Radius (m)
    16.0
    Weight (g, per ski)
    not published

  • 180 cm

    Tip (mm)
    127.0est.
    Waist (mm)
    80.0est.
    Tail (mm)
    105.0est.
    Radius (m)
    16.5
    Weight (g, per ski)
    not published

  • 185 cm

    Tip (mm)
    127.0
    Waist (mm)
    80.0
    Tail (mm)
    105.0
    Radius (m)
    17.0
    Weight (g, per ski)
    not published
Dimensions by length
LengthTip (mm)Waist (mm)Tail (mm)Radius (m)Weight (g, per ski)
160 cm123.080.0101.014.0not published
165 cm123.0est.80.0est.101.0est.14.5not published
170 cm123.0est.80.0est.101.0est.15.0not published
175 cm127.0est.80.0est.105.0est.16.0not published
180 cm127.0est.80.0est.105.0est.16.5not published
185 cm127.080.0105.017.0not published
Nordica Multipista DC 80 TI Fdt, top view, 175 cm: tip 127 mm (est.), waist 80 mm (est.), tail 105 mm (est.)TAIL 105 mm (est.)WAIST 80 mm (est.)TIP 127 mm (est.)

“est.” marks a number the maker does not publish: ours. Where each number was read is under “Where these numbers come from” at the bottom.

What the model says

Carve radius, to scale

  • Sidecut radius: 16 m
  • Carve radius at 30° edge: 13.9 m
  • Carve radius at 45° edge: 11.3 m
All three drawn on one scale, from the same starting point. A smaller arc is a tighter turn.

Edge hold and float

  • Edge hold: 100%, Holds well
  • Float: 23%, Sinks
Ticks mark where the word changes. For 90 kg at 175 cm: hold on groomed snow, float in powder. Model figures, not measurements.

The Nordica Multipista DC 80 TI Fdt at 175 cm, worked out by the Edge Lab model for three skier weights.

  • 70 kg skier

    Carve radius at 30° / 45° / 60°
    13.9 / 11.3 / 8 m
    Edge hold, groomed
    Holds well (100%)
    Edge hold, ice
    On the limit (71%)
    Float, powder
    Sinks (25%)

  • 90 kg skier

    Carve radius at 30° / 45° / 60°
    13.9 / 11.3 / 8 m
    Edge hold, groomed
    Holds well (100%)
    Edge hold, ice
    On the limit (67%)
    Float, powder
    Sinks (23%)

  • 110 kg skier

    Carve radius at 30° / 45° / 60°
    13.9 / 11.3 / 8 m
    Edge hold, groomed
    Holds well (100%)
    Edge hold, ice
    On the limit (65%)
    Float, powder
    Sinks (21%)
The Nordica Multipista DC 80 TI Fdt at 175 cm, worked out by the Edge Lab model for three skier weights.
SkierCarve radius at 30° / 45° / 60° edgeEdge hold, groomedEdge hold, iceFloat, powder
70 kg13.9 / 11.3 / 8 mHolds well (100%)On the limit (71%)Sinks (25%)
90 kg13.9 / 11.3 / 8 mHolds well (100%)On the limit (67%)Sinks (23%)
110 kg13.9 / 11.3 / 8 mHolds well (100%)On the limit (65%)Sinks (21%)

These are the model’s numbers, not measurements. Carve radius comes from the sidecut, so it does not change with weight; edge hold and float do. Flex and camber are our estimates (see “What the model uses” below).

By ability

The Nordica Multipista DC 80 TI Fdt at 175 cm for a 90 kg skier on groomed snow. Reviewers are mostly experts, so read the left of each band for what most skiers get.

Edge hold

On firm snow, 175 cm
  • First-timer: slides (19%)
  • Beginner: slides (41%)
  • Intermediate: on the limit (70%), assumed level
  • Advanced: holds well (95%)
  • Expert: holds well (100%)
assumed intermediate: on the limit (70%)

Float

In soft snow
  • First-timer: sinks (18%)
  • Beginner: sinks (19%)
  • Intermediate: sinks (20%), assumed level
  • Advanced: sinks (21%)
  • Expert: sinks (23%)
assumed intermediate: sinks (20%)

Ease

How forgiving it is
  • First-timer: hard (0%)
  • Beginner: hard (30%)
  • Intermediate: easy (81%), assumed level
  • Advanced: easy (100%)
  • Expert: easy (100%)
assumed intermediate: easy (81%)

Our model, run with working assumptions about how each level skis (edge angle, speed, how much weight reaches the edge). Not measurements. The marked cell assumes an intermediate skier; compare with your own details to see your own level.

Who it suits

It suits

  • 70 kg, intermediate, on groomers255 of 623 skis in the catalogue for this skier.
    • Carve radius about 13.9 m at 30° edge and 11.3 m at 45° (175 cm)
    • Strongest here: edge hold. Weakest: float.

It doesn’t suit

  • 90 kg, advanced, all over the mountain435 of 623 skis in the catalogue for this skier.
    • Carve radius about 13.9 m at 30° edge and 11.3 m at 45° (175 cm)
    • Strongest here: edge hold. Weakest: float.
  • 110 kg, expert, off-piste in soft snow444 of 623 skis in the catalogue for this skier.

    What the model uses

    Physics inputs
    Flex underfoot220 N·m²est.Edge Lab archetype default (interpolated by waist) (read 9 Oct 2026)
    Camber height5.8 mmest.Edge Lab archetype default (interpolated by waist) (read 9 Oct 2026)
    Tip rocker15.8 % of lengthest.Edge Lab archetype default (interpolated by waist) (read 9 Oct 2026)
    Tail rocker6.5 % of lengthest.Edge Lab archetype default (interpolated by waist) (read 9 Oct 2026)
    Tip rocker height7.8 mmest.Edge Lab archetype default (interpolated by waist) (read 9 Oct 2026)
    Tail rocker height1.4 mmest.Edge Lab archetype default (interpolated by waist) (read 9 Oct 2026)
    Mount point offset-7.5 cmest.Edge Lab archetype default (interpolated by waist) (read 9 Oct 2026)

    Made of

    Construction
    CorePerformance Wood
    Metal1 metal layer
    Maker's descriptionDouble Core Titanal, Performance Wood + Metal + Pulse Core + Sidewall

    Only what the maker prints. A field left out is one the maker does not state.

    What reviewers say

    No published reviews of this ski yet.

    Compare with…

    Where to buy

    No shops to show for this ski yet. When we list one, it appears here with the reason it was picked.

    Where these numbers come fromnordica.com, edgelab.ski, read 9 Oct 2026· “est.” marks ours

    Numbers come from the maker’s own pages, with the date we read them. “est.” marks a number the maker does not publish: ours.