Skip to content
Edge LabSign in
Moment

Freeride

Moment Frankenski 2027

Moment Frankenski 2027 top sheet, image © Moment
image © Moment
Category
Freeride
Profile
not stated
Lengths
172 · 182 · 188 cm
Tip / waist / tail
121 / 98 / 121 mm
Radius
18.5 m at 172 cm
Weight
not stated
Core
BAMBOO CORE
Metal
not stated
Carbon
Full carbon
Sidewall
not stated
Base
7500 SERIES CARBON BASE
Intended ability
not stated

Lengths and published dimensions

  • 172 cm

    Tip (mm)
    121.0
    Waist (mm)
    98.0
    Tail (mm)
    121.0
    Radius (m)
    18.5
    Weight (g, per ski)
    not published
  • 182 cm

    Tip (mm)
    121.0
    Waist (mm)
    98.0
    Tail (mm)
    121.0
    Radius (m)
    21.0
    Weight (g, per ski)
    not published
  • 188 cm

    Tip (mm)
    121.0
    Waist (mm)
    98.0
    Tail (mm)
    121.0
    Radius (m)
    22.5
    Weight (g, per ski)
    not published
Dimensions by length
LengthTip (mm)Waist (mm)Tail (mm)Radius (m)Weight (g, per ski)
172 cm121.098.0121.018.5not published
182 cm121.098.0121.021.0not published
188 cm121.098.0121.022.5not published
Moment Frankenski, top view, 172 cm: tip 121 mm, waist 98 mm, tail 121 mmTAIL 121 mmWAIST 98 mmTIP 121 mm

TAIL 121 mmWAIST 98 mmTIP 121 mm

“est.” marks a number the maker does not publish: ours. Where each number was read is under “Where these numbers come from” at the bottom.

What the model says

Carve radius, to scale

  • Sidecut radius: 18.5 m
  • Carve radius at 30° edge: 16 m
  • Carve radius at 45° edge: 13.1 m
All three drawn on one scale, from the same starting point. A smaller arc is a tighter turn.

Edge hold and float

  • Edge hold: 97%, Holds well
  • Float: 66%, Some float
Ticks mark where the word changes. For 90 kg at 172 cm: hold on groomed snow, float in powder. Model figures, not measurements.

The Moment Frankenski at 172 cm, worked out by the Edge Lab model for three skier weights.

  • 70 kg skier

    Carve radius at 30° / 45° / 60°
    16 / 13.1 / 9.3 m
    Edge hold, groomed
    Holds well (100%)
    Edge hold, ice
    On the limit (68%)
    Float, powder
    Floats well (76%)
  • 90 kg skier

    Carve radius at 30° / 45° / 60°
    16 / 13.1 / 9.3 m
    Edge hold, groomed
    Holds well (97%)
    Edge hold, ice
    On the limit (64%)
    Float, powder
    Some float (66%)
  • 110 kg skier

    Carve radius at 30° / 45° / 60°
    16 / 13.1 / 9.3 m
    Edge hold, groomed
    Holds well (94%)
    Edge hold, ice
    On the limit (61%)
    Float, powder
    Some float (59%)
The Moment Frankenski at 172 cm, worked out by the Edge Lab model for three skier weights.
SkierCarve radius at 30° / 45° / 60° edgeEdge hold, groomedEdge hold, iceFloat, powder
70 kg16 / 13.1 / 9.3 mHolds well (100%)On the limit (68%)Floats well (76%)
90 kg16 / 13.1 / 9.3 mHolds well (97%)On the limit (64%)Some float (66%)
110 kg16 / 13.1 / 9.3 mHolds well (94%)On the limit (61%)Some float (59%)

These are the model’s numbers, not measurements. Carve radius comes from the sidecut, so it does not change with weight; edge hold and float do. Flex and camber are our estimates (see “What the model uses” below).

By ability

The Moment Frankenski at 172 cm for a 90 kg skier on groomed snow. Reviewers are mostly experts, so read the left of each band for what most skiers get.

Edge hold

On firm snow, 172 cm
  • First-timer: slides (18%)
  • Beginner: slides (39%)
  • Intermediate: on the limit (68%), assumed level
  • Advanced: holds well (92%)
  • Expert: holds well (97%)
assumed intermediate: on the limit (68%)

Float

In soft snow
  • First-timer: some float (51%)
  • Beginner: some float (54%)
  • Intermediate: some float (57%), assumed level
  • Advanced: some float (61%)
  • Expert: some float (66%)
assumed intermediate: some float (57%)

Ease

How forgiving it is
  • First-timer: hard (0%)
  • Beginner: manageable (61%)
  • Intermediate: easy (100%), assumed level
  • Advanced: easy (100%)
  • Expert: easy (92%)
assumed intermediate: easy (100%)

Our model, run with working assumptions about how each level skis (edge angle, speed, how much weight reaches the edge). Not measurements. The marked cell assumes an intermediate skier; compare with your own details to see your own level.

Who it suits

It suits

  • 90 kg, advanced, all over the mountain212 of 739 skis in the catalogue for this skier.
    • Carve radius about 16 m at 30° edge and 13.1 m at 45° (172 cm)
    • Strongest here: turn shape. Even its weakest part, float, is solid.
  • 110 kg, expert, off-piste in soft snow239 of 739 skis in the catalogue for this skier.
    • Strongest here: edge hold. Weakest: float.

It doesn’t suit

  • 70 kg, intermediate, on groomers402 of 739 skis in the catalogue for this skier.
    • Carve radius about 16 m at 30° edge and 13.1 m at 45° (172 cm)
    • Strongest here: edge hold. Even its weakest part, float, is solid.

What the model uses

Physics inputs
Flex underfoot174 N·m²est.Edge Lab archetype default (interpolated by waist) (read 9 Oct 2026)
Camber height3.6 mmest.Edge Lab archetype default (interpolated by waist) (read 9 Oct 2026)
Tip rocker23.6 % of lengthest.Edge Lab archetype default (interpolated by waist) (read 9 Oct 2026)
Tail rocker11.8 % of lengthest.Edge Lab archetype default (interpolated by waist) (read 9 Oct 2026)
Tip rocker height16.8 mmest.Edge Lab archetype default (interpolated by waist) (read 9 Oct 2026)
Tail rocker height7.2 mmest.Edge Lab archetype default (interpolated by waist) (read 9 Oct 2026)
Mount point offset-6.8 cmest.Edge Lab archetype default (interpolated by waist) (read 9 Oct 2026)

Made of

Construction
CoreBAMBOO CORE
CarbonFull carbon
FibreglassTriaxial
Base7500 SERIES CARBON BASE

Only what the maker prints. A field left out is one the maker does not state.

What reviewers say

No published reviews of this ski yet.

Compare with…

Where to buy

No shops to show for this ski yet. When we list one, it appears here with the reason it was picked.

Where these numbers come frommomentskis.com, edgelab.ski, read 11 Oct 2026· “est.” marks ours

Numbers come from the maker’s own pages, with the date we read them. “est.” marks a number the maker does not publish: ours.