Skip to content
Edge Lab
Sign in
Fischer

Carving

Fischer RC4 Noize ST Pro 2026

Category
Carving
Profile
not stated
Lengths
150 · 155 · 160 · 165 · 170 cm
Tip / waist / tail
118est. / 66est. / 104est. mm
Radius
12.2 mest. at 170 cm
Weight
not stated
Core
Solid Woodcore
Metal
not stated
Carbon
not stated
Sidewall
not stated
Base
not stated
RRP
No RRP published
Intended ability
not stated
Compare for my setupGet more help

Lengths and published dimensions

Dimensions by length
LengthTip (mm)Waist (mm)Tail (mm)Radius (m)Weight (g, per ski)
150 cm118.0est.66.0est.104.0est.9.5est.not published
155 cm118.0est.66.0est.104.0est.10.1est.not published
160 cm118.0est.66.0est.104.0est.10.8est.not published
165 cm118.066.0104.011.52,030
170 cm118.0est.66.0est.104.0est.12.2est.not published
Fischer RC4 Noize ST Pro, top view, 170 cm: tip 118 mm (est.), waist 66 mm (est.), tail 104 mm (est.)TAIL 104 mm (est.)WAIST 66 mm (est.)TIP 118 mm (est.)

TAIL 104 mm (est.)WAIST 66 mm (est.)TIP 118 mm (est.)

“est.” marks a number the maker does not publish: ours. Where each number was read is under “Where these numbers come from” at the bottom.

What the model says

Carve radius, to scale

  • Sidecut radius: 12.20752984389348 m (est.)
  • Carve radius at 30° edge: 10.6 m
  • Carve radius at 45° edge: 8.6 m
All three drawn on one scale, from the same starting point. A smaller arc is a tighter turn.

Edge hold and float

  • Edge hold: 100%, Holds well
  • Float: 11%, Sinks
Ticks mark where the word changes. For 90 kg at 170 cm: hold on groomed snow, float in powder. Model figures, not measurements.

The Fischer RC4 Noize ST Pro at 170 cm, worked out by the Edge Lab model for three skier weights.

  • 70 kg skier

    Carve radius at 30° / 45° / 60°
    10.6 / 8.6 / 6.1 m
    Edge hold, groomed
    Holds well (100%)
    Edge hold, ice
    On the limit (78%)
    Float, powder
    Sinks (11%)

  • 90 kg skier

    Carve radius at 30° / 45° / 60°
    10.6 / 8.6 / 6.1 m
    Edge hold, groomed
    Holds well (100%)
    Edge hold, ice
    On the limit (74%)
    Float, powder
    Sinks (11%)

  • 110 kg skier

    Carve radius at 30° / 45° / 60°
    10.6 / 8.6 / 6.1 m
    Edge hold, groomed
    Holds well (100%)
    Edge hold, ice
    On the limit (72%)
    Float, powder
    Sinks (11%)
The Fischer RC4 Noize ST Pro at 170 cm, worked out by the Edge Lab model for three skier weights.
SkierCarve radius at 30° / 45° / 60° edgeEdge hold, groomedEdge hold, iceFloat, powder
70 kg10.6 / 8.6 / 6.1 mHolds well (100%)On the limit (78%)Sinks (11%)
90 kg10.6 / 8.6 / 6.1 mHolds well (100%)On the limit (74%)Sinks (11%)
110 kg10.6 / 8.6 / 6.1 mHolds well (100%)On the limit (72%)Sinks (11%)

These are the model’s numbers, not measurements. Carve radius comes from the sidecut, so it does not change with weight; edge hold and float do. Flex and camber are our estimates (see “What the model uses” below).

By ability

The Fischer RC4 Noize ST Pro at 170 cm for a 90 kg skier on groomed snow. Reviewers are mostly experts, so read the left of each band for what most skiers get.

Edge hold

On firm snow, 170 cm
  • First-timer: slides (19%)
  • Beginner: slides (41%)
  • Intermediate: on the limit (70%), assumed level
  • Advanced: holds well (95%)
  • Expert: holds well (100%)
assumed intermediate: on the limit (70%)

Float

In soft snow
  • First-timer: sinks (8%)
  • Beginner: sinks (9%)
  • Intermediate: sinks (9%), assumed level
  • Advanced: sinks (10%)
  • Expert: sinks (11%)
assumed intermediate: sinks (9%)

Ease

How forgiving it is
  • First-timer: hard (0%)
  • Beginner: hard (3%)
  • Intermediate: manageable (61%), assumed level
  • Advanced: easy (100%)
  • Expert: easy (100%)
assumed intermediate: manageable (61%)

Our model, run with working assumptions about how each level skis (edge angle, speed, how much weight reaches the edge). Not measurements. The marked cell assumes an intermediate skier; compare with your own details to see your own level.

Who it suits

It suits

None of the three skiers we check puts it in the top half of the catalogue.

It doesn’t suit

  • 70 kg, intermediate, on groomers586 of 802 skis in the catalogue for this skier.
    • Carve radius about 10.6 m at 30° edge and 8.6 m at 45° (170 cm)
    • Strongest here: edge hold. Weakest: float.
  • 90 kg, advanced, all over the mountain775 of 802 skis in the catalogue for this skier.
    • 110 kg, expert, off-piste in soft snow783 of 802 skis in the catalogue for this skier.

      What the model uses

      Physics inputs
      Flex underfoot230 N·m²est.Edge Lab archetype default (interpolated by waist) (read 9 Oct 2026)
      Camber height7.0 mmest.Edge Lab archetype default (interpolated by waist) (read 9 Oct 2026)
      Tip rocker12.0 % of lengthest.Edge Lab archetype default (interpolated by waist) (read 9 Oct 2026)
      Tail rocker6.0 % of lengthest.Edge Lab archetype default (interpolated by waist) (read 9 Oct 2026)
      Tip rocker height4.0 mmest.Edge Lab archetype default (interpolated by waist) (read 9 Oct 2026)
      Tail rocker height0.0 mmest.Edge Lab archetype default (interpolated by waist) (read 9 Oct 2026)
      Mount point offset-7.0 cmest.Edge Lab archetype default (interpolated by waist) (read 9 Oct 2026)

      Made of

      Construction
      CoreSolid Woodcore

      Only what the maker prints. A field left out is one the maker does not state.

      What reviewers say

      No reviews indexed yet for this ski. We read Realskiers (opens in a new tab), Ski Canada Magazine (opens in a new tab) and SkiEssentials (opens in a new tab); check their sites directly.

      Compare with…

      Get more help

      Before you buy

      Ordered by what fits this answer. Partner links say so on the row, and a fee never changes the order.

      Where to buy

      No shops to show for this ski yet. When we list one, it appears here with the reason it was picked.

      Where these numbers come fromfischersports.com, edgelab.ski, read 14 Oct 2026· “est.” marks ours

      Numbers come from the maker’s own pages, with the date we read them. “est.” marks a number the maker does not publish: ours.