Skip to content
Edge LabSign in
Elan

Carving

Elan WINGMAN 80 TI

Elan WINGMAN 80 TI top sheet, image © Elan
image © Elan
Category
Carving
Profile
not stated
Lengths
152 · 160 · 168 · 174 cm
Tip / waist / tail
127 / 80 / 110 mm
Radius
14.4 m at 174 cm
Weight
not stated
Core
Power Woodcore
Metal
1 metal sheet
Carbon
not stated
Sidewall
not stated
Base
Sintered High Speed Gliding base
Intended ability
not stated

Lengths and published dimensions

  • 152 cm

    Tip (mm)
    126.0
    Waist (mm)
    78.0
    Tail (mm)
    110.0
    Radius (m)
    10.8
    Weight (g, per ski)
    not published
  • 160 cm

    Tip (mm)
    126.0
    Waist (mm)
    79.0
    Tail (mm)
    110.0
    Radius (m)
    12.4
    Weight (g, per ski)
    not published
  • 168 cm

    Tip (mm)
    127.0
    Waist (mm)
    79.0
    Tail (mm)
    110.0
    Radius (m)
    13.0
    Weight (g, per ski)
    not published
  • 174 cm

    Tip (mm)
    127.0
    Waist (mm)
    80.0
    Tail (mm)
    110.0
    Radius (m)
    14.4
    Weight (g, per ski)
    not published
Dimensions by length
LengthTip (mm)Waist (mm)Tail (mm)Radius (m)Weight (g, per ski)
152 cm126.078.0110.010.8not published
160 cm126.079.0110.012.4not published
168 cm127.079.0110.013.0not published
174 cm127.080.0110.014.4not published
Elan WINGMAN 80 TI, top view, 174 cm: tip 127 mm, waist 80 mm, tail 110 mmTAIL 110 mmWAIST 80 mmTIP 127 mm

“est.” marks a number the maker does not publish: ours. Where each number was read is under “Where these numbers come from” at the bottom.

What the model says

Carve radius, to scale

  • Sidecut radius: 14.4 m
  • Carve radius at 30° edge: 12.5 m
  • Carve radius at 45° edge: 10.2 m
All three drawn on one scale, from the same starting point. A smaller arc is a tighter turn.

Edge hold and float

  • Edge hold: 100%, Holds well
  • Float: 23%, Sinks
Ticks mark where the word changes. For 90 kg at 174 cm: hold on groomed snow, float in powder. Model figures, not measurements.

The Elan WINGMAN 80 TI at 174 cm, worked out by the Edge Lab model for three skier weights.

  • 70 kg skier

    Carve radius at 30° / 45° / 60°
    12.5 / 10.2 / 7.2 m
    Edge hold, groomed
    Holds well (100%)
    Edge hold, ice
    On the limit (72%)
    Float, powder
    Sinks (25%)
  • 90 kg skier

    Carve radius at 30° / 45° / 60°
    12.5 / 10.2 / 7.2 m
    Edge hold, groomed
    Holds well (100%)
    Edge hold, ice
    On the limit (69%)
    Float, powder
    Sinks (23%)
  • 110 kg skier

    Carve radius at 30° / 45° / 60°
    12.5 / 10.2 / 7.2 m
    Edge hold, groomed
    Holds well (100%)
    Edge hold, ice
    On the limit (66%)
    Float, powder
    Sinks (21%)
The Elan WINGMAN 80 TI at 174 cm, worked out by the Edge Lab model for three skier weights.
SkierCarve radius at 30° / 45° / 60° edgeEdge hold, groomedEdge hold, iceFloat, powder
70 kg12.5 / 10.2 / 7.2 mHolds well (100%)On the limit (72%)Sinks (25%)
90 kg12.5 / 10.2 / 7.2 mHolds well (100%)On the limit (69%)Sinks (23%)
110 kg12.5 / 10.2 / 7.2 mHolds well (100%)On the limit (66%)Sinks (21%)

These are the model’s numbers, not measurements. Carve radius comes from the sidecut, so it does not change with weight; edge hold and float do. Flex and camber are our estimates (see “What the model uses” below).

By ability

The Elan WINGMAN 80 TI at 174 cm for a 90 kg skier on groomed snow. Reviewers are mostly experts, so read the left of each band for what most skiers get.

Edge hold

On firm snow, 174 cm
  • First-timer: slides (19%)
  • Beginner: slides (41%)
  • Intermediate: on the limit (70%), assumed level
  • Advanced: holds well (95%)
  • Expert: holds well (100%)
assumed intermediate: on the limit (70%)

Float

In soft snow
  • First-timer: sinks (18%)
  • Beginner: sinks (19%)
  • Intermediate: sinks (20%), assumed level
  • Advanced: sinks (21%)
  • Expert: sinks (23%)
assumed intermediate: sinks (20%)

Ease

How forgiving it is
  • First-timer: hard (0%)
  • Beginner: hard (24%)
  • Intermediate: manageable (77%), assumed level
  • Advanced: easy (100%)
  • Expert: easy (100%)
assumed intermediate: manageable (77%)

Our model, run with working assumptions about how each level skis (edge angle, speed, how much weight reaches the edge). Not measurements. The marked cell assumes an intermediate skier; compare with your own details to see your own level.

Who it suits

It suits

  • 70 kg, intermediate, on groomers150 of 547 skis in the catalogue for this skier.
    • Carve radius about 12.5 m at 30° edge and 10.2 m at 45° (174 cm)
    • Strongest here: edge hold. Weakest: float.

It doesn’t suit

  • 90 kg, advanced, all over the mountain419 of 547 skis in the catalogue for this skier.
    • Carve radius about 12.5 m at 30° edge and 10.2 m at 45° (174 cm)
    • Strongest here: edge hold. Weakest: float.
  • 110 kg, expert, off-piste in soft snow424 of 547 skis in the catalogue for this skier.

    What the model uses

    Physics inputs
    Flex underfoot222 N·m²est.Edge Lab archetype default (interpolated by waist) (read 9 Oct 2026)
    Camber height6.0 mmest.Edge Lab archetype default (interpolated by waist) (read 9 Oct 2026)
    Tip rocker15.3 % of lengthest.Edge Lab archetype default (interpolated by waist) (read 9 Oct 2026)
    Tail rocker6.4 % of lengthest.Edge Lab archetype default (interpolated by waist) (read 9 Oct 2026)
    Tip rocker height7.3 mmest.Edge Lab archetype default (interpolated by waist) (read 9 Oct 2026)
    Tail rocker height1.2 mmest.Edge Lab archetype default (interpolated by waist) (read 9 Oct 2026)
    Mount point offset-7.4 cmest.Edge Lab archetype default (interpolated by waist) (read 9 Oct 2026)

    Made of

    Construction
    CorePower Woodcore
    Metal1 metal layer
    BaseSintered High Speed Gliding base
    Maker's descriptionPower Woodcore, Mono Ti, RST Sidewall

    Only what the maker prints. A field left out is one the maker does not state.

    What reviewers say

    No published reviews of this ski yet.

    Compare with…

    Where to buy

    No shops to show for this ski yet. When we list one, it appears here with the reason it was picked.

    Where these numbers come fromelansports.com, edgelab.ski, read 9 Oct 2026· “est.” marks ours

    Numbers come from the maker’s own pages, with the date we read them. “est.” marks a number the maker does not publish: ours.