Skip to content
Edge LabSign in
DPS

Freeride · Rocker, camber, rocker

DPS Wailer 107

DPS Wailer 107 top sheet, image © DPS
image © DPS
Category
Freeride
Profile
Rocker, camber, rocker
Lengths
155 · 163 · 171 · 179 · 184 · 189 cm
Tip / waist / tail
135 / 107 / 121 mm
Radius
15.0 m at 171 cm
Weight
1,826 g per ski at 171 cm
Core
poplar wood core
Metal
not stated
Carbon
Full carbon
Sidewall
not stated
Base
4000-series World Cup base material
Intended ability
not stated

Lengths and published dimensions

  • 155 cm

    Tip (mm)
    131.0
    Waist (mm)
    107.0
    Tail (mm)
    119.0
    Radius (m)
    15.0
    Weight (g, per ski)
    1,602
  • 163 cm

    Tip (mm)
    132.0
    Waist (mm)
    107.0
    Tail (mm)
    120.0
    Radius (m)
    15.0
    Weight (g, per ski)
    1,739
  • 171 cm

    Tip (mm)
    135.0
    Waist (mm)
    107.0
    Tail (mm)
    121.0
    Radius (m)
    15.0
    Weight (g, per ski)
    1,826
  • 179 cm

    Tip (mm)
    137.0
    Waist (mm)
    107.0
    Tail (mm)
    123.0
    Radius (m)
    15.0
    Weight (g, per ski)
    2,000
  • 184 cm

    Tip (mm)
    139.0
    Waist (mm)
    107.0
    Tail (mm)
    124.0
    Radius (m)
    15.0
    Weight (g, per ski)
    2,040
  • 189 cm

    Tip (mm)
    140.0
    Waist (mm)
    107.0
    Tail (mm)
    125.0
    Radius (m)
    15.0
    Weight (g, per ski)
    2,270
Dimensions by length
LengthTip (mm)Waist (mm)Tail (mm)Radius (m)Weight (g, per ski)
155 cm131.0107.0119.015.01,602
163 cm132.0107.0120.015.01,739
171 cm135.0107.0121.015.01,826
179 cm137.0107.0123.015.02,000
184 cm139.0107.0124.015.02,040
189 cm140.0107.0125.015.02,270
DPS Wailer 107, top view, 171 cm: tip 135 mm, waist 107 mm, tail 121 mmTAIL 121 mmWAIST 107 mmTIP 135 mm

“est.” marks a number the maker does not publish: ours. Where each number was read is under “Where these numbers come from” at the bottom.

What the model says

Carve radius, to scale

  • Sidecut radius: 15 m
  • Carve radius at 30° edge: 13 m
  • Carve radius at 45° edge: 10.6 m
All three drawn on one scale, from the same starting point. A smaller arc is a tighter turn.

Edge hold and float

  • Edge hold: 95%, Holds well
  • Float: 91%, Floats well
Ticks mark where the word changes. For 90 kg at 171 cm: hold on groomed snow, float in powder. Model figures, not measurements.

The DPS Wailer 107 at 171 cm, worked out by the Edge Lab model for three skier weights.

  • 70 kg skier

    Carve radius at 30° / 45° / 60°
    13 / 10.6 / 7.5 m
    Edge hold, groomed
    Holds well (99%)
    Edge hold, ice
    On the limit (68%)
    Float, powder
    Floats well (93%)
  • 90 kg skier

    Carve radius at 30° / 45° / 60°
    13 / 10.6 / 7.5 m
    Edge hold, groomed
    Holds well (95%)
    Edge hold, ice
    On the limit (63%)
    Float, powder
    Floats well (91%)
  • 110 kg skier

    Carve radius at 30° / 45° / 60°
    13 / 10.6 / 7.5 m
    Edge hold, groomed
    Holds well (93%)
    Edge hold, ice
    Slides (59%)
    Float, powder
    Floats well (81%)
The DPS Wailer 107 at 171 cm, worked out by the Edge Lab model for three skier weights.
SkierCarve radius at 30° / 45° / 60° edgeEdge hold, groomedEdge hold, iceFloat, powder
70 kg13 / 10.6 / 7.5 mHolds well (99%)On the limit (68%)Floats well (93%)
90 kg13 / 10.6 / 7.5 mHolds well (95%)On the limit (63%)Floats well (91%)
110 kg13 / 10.6 / 7.5 mHolds well (93%)Slides (59%)Floats well (81%)

These are the model’s numbers, not measurements. Carve radius comes from the sidecut, so it does not change with weight; edge hold and float do. Flex and camber are our estimates (see “What the model uses” below).

By ability

The DPS Wailer 107 at 171 cm for a 90 kg skier on groomed snow. Reviewers are mostly experts, so read the left of each band for what most skiers get.

Edge hold

On firm snow, 171 cm
  • First-timer: slides (18%)
  • Beginner: slides (39%)
  • Intermediate: on the limit (67%), assumed level
  • Advanced: holds well (90%)
  • Expert: holds well (95%)
assumed intermediate: on the limit (67%)

Float

In soft snow
  • First-timer: floats well (70%)
  • Beginner: floats well (74%)
  • Intermediate: floats well (78%), assumed level
  • Advanced: floats well (85%)
  • Expert: floats well (91%)
assumed intermediate: floats well (78%)

Ease

How forgiving it is
  • First-timer: hard (19%)
  • Beginner: easy (82%)
  • Intermediate: easy (100%), assumed level
  • Advanced: easy (94%)
  • Expert: easy (82%)
assumed intermediate: easy (100%)

Our model, run with working assumptions about how each level skis (edge angle, speed, how much weight reaches the edge). Not measurements. The marked cell assumes an intermediate skier; compare with your own details to see your own level.

Who it suits

It suits

  • 70 kg, intermediate, on groomers1 of 547 skis in the catalogue for this skier.
    • Carve radius about 13 m at 30° edge and 10.6 m at 45° (171 cm)
    • Turn shape, edge hold and float all score about the same for this skier.
  • 90 kg, advanced, all over the mountain82 of 547 skis in the catalogue for this skier.
    • Strongest here: edge hold. Even its weakest part, turn shape, is solid.
  • 110 kg, expert, off-piste in soft snow86 of 547 skis in the catalogue for this skier.

    It doesn’t suit

    It lands in the top half of the catalogue for all three skiers we check.

    What the model uses

    Physics inputs
    Flex underfoot148 N·m²est.Edge Lab archetype default (interpolated by waist) (read 9 Oct 2026)
    Camber height2.3 mmest.Edge Lab archetype default (interpolated by waist) (read 9 Oct 2026)
    Tip rocker29.0 % of lengthest.Edge Lab archetype default (interpolated by waist) (read 9 Oct 2026)
    Tail rocker18.8 % of lengthest.Edge Lab archetype default (interpolated by waist) (read 9 Oct 2026)
    Tip rocker height23.0 mmest.Edge Lab archetype default (interpolated by waist) (read 9 Oct 2026)
    Tail rocker height12.0 mmest.Edge Lab archetype default (interpolated by waist) (read 9 Oct 2026)
    Mount point offset-5.5 cmest.Edge Lab archetype default (interpolated by waist) (read 9 Oct 2026)

    Made of

    Construction
    Corepoplar wood core
    CarbonFull carbon
    Base4000-series World Cup base material
    Maker's descriptionCarbon laminate and a poplar wood core

    Only what the maker prints. A field left out is one the maker does not state.

    What reviewers say

    No published reviews of this ski yet.

    Compare with…

    Where to buy

    No shops to show for this ski yet. When we list one, it appears here with the reason it was picked.

    Where these numbers come fromdpsskis.com, edgelab.ski, read 9 Oct 2026· “est.” marks ours

    Numbers come from the maker’s own pages, with the date we read them. “est.” marks a number the maker does not publish: ours.